|
L55 – Tank Level SystemThe system comprises a tank level controller with analogue level display which receives a continuous signal from a matching transducer. |
|
| Technical Specifications [pdf] | Installation Guide [pdf] | |
|
|
||
|
L110 – Tank Level ControllerThis controller displays tank contents in programmable units and also controls fuel delivery. Data relating to fuel deliveries can be downloaded via a USB port and an option allows for a GPRS module to transmit a theft or rapid loss alarm to a remote location via the internet or SMS. This controller is suitable for use with our T/LL200 hydrostatic level sensor. |
|
| Technical Specifications [pdf] | Installation Guide [pdf] | |
|
|
||
|
OP/02 – Tank OverFill Protection ProbeThe Model OP/02 tank overfill prevention probe is designed for use in static bulk storage fuel tanks and operates by passing a signal back to the fuel delivery system when the fuel reaches the maximum filling level. |
|
| Technical Specifications [pdf] | ||
|
|
||
|
L70 – Coolant Check Management SystemThis system is designed to warn if the coolant level is below a specified minimum. A typical application is for a coach or bus to have the coolant level checked before entering service for the day. If the coolant level is too low then a red light illuminates and the vehicle cannot be started until the coolant is replenished. |
|
| Technical Specifications [pdf] | ||
|
|
||
|
L100 – Hydrostatic Level Management SystemThis system provides a continuous display of tank contents. Using a high quality pressure transducer, the level is displayed as a percentage on the controller. High and low level visual and audible alarms are incorporated. Max tank depth is 4M for diesel fuel. |
|
| Technical Specifications [pdf] | Installation Guide [pdf] | |
|
|
||
